Model 4100
Four Conductors,
3@100amps & 1@60amps
500V

 


Wire connection clamps included 
 
Model No. Terminals Voltage
AC/DC
Amp
Rating
@500VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
 Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
4100 4 0-500 3@100,1@60 100

<1m

100 160(70) /-20(-29) 2500

>50M

Connector housing material is anodized aluminum

 
 Model 4100 Standard Wire Connections

 
 Model 4100 Accessories
41080
Grounding Collar w/ screw
(qty 2 included)
41081
Tab Clamp w/ screws
(qty 6 included)
 
 
 Model 4100 Suggested Mounting Methods
Model 4100 is typically mounted by the black anodized aluminum body using a set screw.  When mounting horizontally, mount the Mercotac so the body of the connector rotates. For vertical orientation with the rotating member above, mount to the model 4100 top (gray) plastic bushing.

Typical Body Mount Hole Dimensions

MODEL HOLE DIAMETER (Ø) * DEPTH
4100 2.365″    (60.07) 3.00″    (76.2)
     

Typical Vertical Top Bushing Mount Hole Dimensions

4100 2.365″    (60.07) 2.50″    (63.5)
*Inch (mm) Tolerance Ø    +.001″ (+.025)    
     -.000″ (-.000)    











Installation Notes:

  • the up arrow should not point below horizontal
  • do not solder to or bend connector tabs
  • avoid lateral forces and mechanical loads (overly stiff or tight wires)
  • do not rigid mount both ends of connector
  • limit mounting eccentricity (runout / wobble) to .005″ (.13mm)
  • provide overload protection within the circuit
  • avoid vibration and bumping motions